PTO Shaft for Round Balers

PTO Shaft for Round Balers

If the product you need is not listed, go ahead and get a free quote!

PTO Shaft for CASE IH Round Balers

Applicable PTO shaft models

CASE calls for CAT4 and CAT5 constant velocity drivelines depending on the model, with friction clutch.

Input shafts are 1.375-6 or 1.375-21.

Models: RB444, RB454, RB455A, RB464, RB554, RB564

Available for tractors using 1.375-6, 1.375-21, 1.750-20 spline
Input shaft is usually 1.375-6

Other combinations are available

Models
PTO Shaft Size
PTO Required,
hp (kW)
RB444
CAT4
40 (30)
RB454
CAT4
60 (45)
RB454 Silage
CAT4
65 (48)
RB454 Rotor Cutter
CAT5
100 (75)
RB455A
CAT4
40 (30)
RB464
CAT5
70 (52)
RB554
CAT5
70 (52)
RB564
CAT5
80 (60)

 

Constant Velocity PTO Tractor

Base Part Number

 

(add implement device)
CAT3/540
1.375-6
71R4121UCW07000
CAT4/540
1.375-6
71R6121UCW07000
CAT4/1000
1.375-21
71R6121UCW08000
CAT5/540
1.375-6
71R8121UCW07000
CAT5/1000
1.375-21
71R8121UCW08000

Baler Input Requirements

FT Clutches for 1.375-6 spline input

Universal Size Torque nm Part Number
CAT3 / S4
1000nm
6QE344901R
CAT3 / S4
1000nm
635E41203R
CAT4 / S6
1800nm
663H53403R
CAT5 / S8
1450nm
6LM453003R

PTO Shaft for John Deere Round Balers

Applicable PTO Shaft Models

John Deere Round Balers and Premium Round Balers

Models: 469, 569 Round Balers, and Premium Round Balers

John Deere uses CAT4 and CAT5 constant-velocity drivelines, depending on the model, with friction clutch or cam clutch.

Original Equipment PTO Shaft is Replacement of Weasler “Equal Arm” CV

Input shafts are 1.375-6 or 1.375-21. 

PTO Shaft: CAT 3, 4, 5 Constant Velocity

Available for tractors using:

1.375″-6 or 1.375″-21 spline

Other combinations are available.

If you have a 1.75″ x 20 spline tractor output we can modify a PTO CV head for you. Please call!

Model PTO Protection
469 Standard CAT4 FRICTION CLUTCH
469 Premium CAT4 CAM CLUTCH
469 Silage CAT4 FRICTION CLUTCH
569 Standard CAT4 FRICTION CLUTCH
569 Premium CAT4 CAM CLUTCH
569 Silage CAT4 FRICTION CLUTCH

Original PTO Shaft Equipment

OEM Replacement of Weasler Half Shaft Replacements

Check the diameter of the telescopic spline. Both sizes are used in various models.

OEM John Deere PTO Shaft Replacements

Tractor splines Telescoping splines Part Number
1.375-6 1.375-20 92-14558659
1.375-6 1.375-20 92-14658659
1.375-6 1.750-20 92-14503559
1.375-21 1.750-20 92-14603559

Recommended Complete Replacement with Tube Profile

Constant Velocity PTO Tractor

Base Part Number

 

(add implement device)
CAT3/540
1.375-6
71R4121UCW07000
CAT4/540
1.375-6
CS6R121U2WR7014
CAT4/1000
1.375-21
CS6R121U2WR8000
CAT5/540
1.375-6
71R8121UCWR7R10
CAT5/1000
1.375-21
CS8R121U2WR8000

Baler Input Requirements

FT Clutches for 1.375-6 Spline Input
Universal Size Torque nm Part Number
CAT3 / S4
1000nm
6QE344901R
CAT3 / S4
1000nm
635E41203R
CAT4 / S6
1450nm
663G48403R
CAT4 / S7
1450nm
663H53403R
CAT5 / S8
1450nm
663L53403R
CAT5 / S9
1450nm
6LM453003R

PTO Shaft for CASE IH Round Balers

Round Baler PTO Shaft Corresponding Specification

Model PTO Protection

KR100/125/155

 

/130/160

Size 4 Standard *1210 * 1.375-6

 

Size 4 CV * 1210 * 1.375-6

 FT34 * 1.375-6 * 1000nm
1500 / 1800 Size 4 or Size 6 CV with 1.375-6 FT32 @ 1000nm or FT42 @ 1450nm
1500V / 1250 MC 2380 or 2480 CV with 1.375-6 K64/2 Cutout @ 1050 or 1500nm * 1.375-6
1250 / 1550 size 4 (cat3) CV with 1.375-6 FT32 or FF1 @ 1000nm
1250 / 1500 some using size 6 CV (cat4) FT42 @ 1450nm

Constant Velocity PTO Tractor

Base Part Number

 

(add implement device)
CAT3/540
1.375-6
71R4121UCW07000
CAT4/540
1.375-6
71R6121UCW07000

Krone Round Balers are equipped with a friction or cutout clutch

 

Baler Input Requirements

FT Clutches for 1.375-6 Spline Input

Universal Size Torque nm Part Number
CAT3 / S4
1000nm
6QE344901R
CAT3 / S4
1000nm
635E41203R
CAT4 / S6
1800nm
663H53403R