PTO Shaft for Square Balers
إذا لم يكن المنتج الذي تحتاجه مدرجًا في القائمة، فاستمر واحصل على عرض أسعار مجاني!
PTO Shaft for New Holland Disc Mower Discbines
Our drive PTO shafts can be adapted to the following disc mower models：
New Holland Discbines 1431, 1432 Model 411, 1409, 1410, 1411, 1412, 1441, 1442, 1431, 143
H7220, H7230, H7320, H7330, H7450, H7460, H7550, H7560
Case IH DC 132,
Different Models PTO Shaft for Sale
All disciplines use multiple PTO shafts and a combination clutch.
The types of PTO shafts and clutch locations vary from model to model.
Models below were initially equipped with Replacement of Weasler and Replacement of Bondioli & Pavesi PTO shafts.
| Part Number | Tractor | Implement | وصف |
| New Holland Discbines 1431, 1432 | |||
| 14656853 | 1.375-21 | 1.5″ x 23 spline | 55N 80×50 Double CV |
| 82-14656853 | none | 1.5″ x 23 spline | 55N 50 degrees CV half(implement) |
| 83-14656853 | 1.375-21 | none | 55N 80 degrees CV half(tractor) |
| 83-14756853 | 1.750-20 | none | 55N 80 degrees CV half(tractor) |
| New Holland Discbines Model 411 | |||
| 14656853 | 1.375-21 | 1.5″ x 23 spline | 55N 80×50 Double CV |
| 82-14656853 | none | 1.5″ x 23 spline | 55N 50 degrees CV half(implement) |
| 83-14656853 | 1.375-21 | none | 55N 80 degrees CV half(tractor) |
| 83-14756853 | 1.750-20 | none | 55N 80 degrees CV half(tractor) |
| 857-5521 | none | 1.375-21 | 55N 50 degrees CV clamp yoke only |
| New Holland Discbines 1409, 1410, 1411, 1412, 1441, 1442 | |||
| 55N-NH14XX-DISCBINE | 1.375-6 | none | CAT6 CV with 1.375-21 yoke |
| 14656848 | 1.375-21 | none | 55N CV without implementing yoke |
| 14756848 | 1.750-20 | none | 55N CV without implementing yoke |
| New Holland Discbines H7220, H7230, H7320, H7330, H7450, H7460, H7550, H7560 | |||
| 14605548 | 1.375-21 | none | 55N CV without implementing yoke |
| 14705548 | 1.375-21 | none | 55N CV without implementing yoke |
| Model: | Primary | Intermediate | Secondary | HP | RPM |
|---|---|---|---|---|---|
| H7220 |
35N CV
|
35N Square
|
65
|
540
|
|
| H7230 |
55N CV or standard
|
Jack style 1.375-21 |
H8 double CV
|
80
|
540/1000
|
| H7320 |
35N CV
|
35N Square
|
65
|
540
|
|
| H7330 |
55N CV or standard
|
Jack Style 1.375-21 |
H8 double CV
|
80
|
540/1000
|
| H7450 |
55N Double 80/50 CV or 55N standard (for swivel) |
55N standard
|
90
|
1000
|
|
| H7460 |
55N Standard
|
55N Square w/clutch
|
55N Standard
|
100
|
1000
|
| H7550 |
55N Double 80/50 CV or 55N standard (for swivel) |
55N standard
|
55N standard
|
90
|
1000
|
| H7560 |
55N Standard
|
55N Square w/clutch
|
55N standard
|
100
|
1000
|
PTO Shaft for New Holland Disc Mower Discbines
Slip Clutch PTO Shaft Parts
Disc Mower PTO Shaft Specifications
Original equipment is a replacement for the 80 degree Weasler 55N on the tractor side and a 50 degree CV on the disc mower side. The input shaft is typically 1.50 inches round.
This PTO shaft with slip clutch is made of solid steel and is equipped with a 1-3/8 inch 6 spline on the tractor and implement ends. It is equipped with a slip clutch to protect the equipment or tractor PTO shaft and make simple replacement. It can be used as a farm power tool to significantly improve your work efficiency. Our PTO shaft can fit the models of these agricultural machines: Hesston 1340, 1345/some CaseIH 8312, Massy Ferguson PTD 12, and New Idea 5512.
| Part Number | Tractor | Implement | وصف |
| 14656849 | 1.375-21 | 1.5″ RD clamp | 55N 80×50 Double CV |
| 82-14656849 | none | 1.5″ RD clamp | 55N 50 degrees CV half(implement) |
| 83-14656849 | 1.375-21 | none | 55N 80 degrees CV half(tractor) |
AR 
IT 
EN 
DE 
PL 
FR 
ES